(800) 245-6473
Penguin Chillers 1 HP Water Chiller
Upgrade your DIY cold plunge setup with the Penguin Chillers 1 HP HE Water Chiller, featuring a robust titanium heat exchanger. This chiller is an ideal choice for cold plunge enthusiasts, as the titanium design eliminates the risk of copper contamination – a common issue with standard copper heat exchangers. Copper can accumulate toxic levels in closed-loop systems, posing health risks, but our titanium heat exchanger ensures safe, clean water for your plunge.
The durability and corrosion resistance of titanium not only promise long-lasting performance but also make this chiller an incredibly reliable option for your at-home cold plunge needs. Whether you're looking to aid muscle recovery after intense workouts or simply seeking the invigorating benefits of cold water therapy, our chiller offers consistent and efficient cooling.
Compact, efficient, and built for performance, this water chiller is the perfect heart of your cold plunge setup, ensuring a refreshing and rejuvenating experience every time.
The digital controller is crucial for keeping the water at the desired temperature. It consistently checks the temperature of the water flowing in, and it requires steady water flow to ensure precise temperature readings. When the water's temperature rises above the set point, the controller turns on the compressor and fan to reduce the water temperature. It turns these components off again once it reaches the desired temperature.
For indoor use only.
Features
-
10,000 BTU/hr
-
1″ NPT inlet/outlet ports (female threaded PVC)
-
Titanium Heat Exchanger = Reef Tank Safe
-
Recommended operating range ~40°F to ~100°F
-
59 dBA
-
6′ Power Cord
-
110 – 120 Volts / 7.2 Amps / 830 Watts
-
19.25”W x 19.75”D x 14.25”H
-
58 Pounds
-
1 Year Product Warranty
-
Proudly made in the USA
Specifications
-
Cooling Capacity: 10,000 BTU/hr
-
Horsepower: 1 HP
-
Heat Exchanger: Titanium (corrosion-resistant and reef-safe; prevents copper contamination)
-
Recommended Operating Range: ~40°F to ~100°F
-
Sound Level: 59 dBA
-
Power Requirements: 110–120V / 7.2A / 830W
-
Inlet/Outlet Ports: 1″ NPT (female threaded PVC)
-
Dimensions: 19.25″W × 19.75″D × 14.25″H
-
Weight: 58 lbs
-
Controller Type: Digital temperature controller with automatic compressor/fan activation
-
Flow Requirement: Continuous water flow required for accurate temperature monitoring
-
Pump Compatibility: Danner Mag-Drive 500–1800 GPH or equivalent (rated below 10 psi max pressure)
-
Efficiency: HE (High Efficiency) model with larger titanium coil for enhanced cooling without increased power consumption
-
Warranty: 1 Year Product Warranty
-
Usage: Indoor use only
-
Country of Manufacture: Proudly made in the USA
Pump and Controller Recommendation
-
Pump: Danner Mag-drive 500gph – 1800gph. Other pumps may be acceptable, however they need to be rated for less than 10psi max pressure. If you’re using a different pool/spa pump or any other pump rated in horsepower please talk with our tech support first. There is typically a simple work around that allows our chillers to provide cooling to systems which operate at higher pressures. We would be more than happy to help you determine the best method of installation for your system. Be sure and visit our “Accessories” web page to view our selection of pumps and accessory packages available.
-
Digital Controller: The controller constantly monitors your systems incoming water temperature, therefore, water flow is needed at all times in order for it to successfully read current temperatures. When your systems water temperature moves above your desired set point, the controller tells the compressor and fan to turn on and begin cooling the water. Once your desired set point temperature is reached, the compressor and fan will turn off.
-
High Efficiency: HE models utilize a larger titanium coil compared to the standard version. The larger coil offers more contact surface area and contact time to provide more cooling. Both models run the same compressor, which means their power draw is the same. The high efficiency model is providing more cooling without any extra power consumption.
Description
Penguin Chillers 1 HP Water Chiller
Upgrade your DIY cold plunge setup with the Penguin Chillers 1 HP HE Water Chiller, featuring a robust titanium heat exchanger. This chiller is an ideal choice for cold plunge enthusiasts, as the titanium design eliminates the risk of copper contamination – a common issue with standard copper heat exchangers. Copper can accumulate toxic levels in closed-loop systems, posing health risks, but our titanium heat exchanger ensures safe, clean water for your plunge.
The durability and corrosion resistance of titanium not only promise long-lasting performance but also make this chiller an incredibly reliable option for your at-home cold plunge needs. Whether you're looking to aid muscle recovery after intense workouts or simply seeking the invigorating benefits of cold water therapy, our chiller offers consistent and efficient cooling.
Compact, efficient, and built for performance, this water chiller is the perfect heart of your cold plunge setup, ensuring a refreshing and rejuvenating experience every time.
The digital controller is crucial for keeping the water at the desired temperature. It consistently checks the temperature of the water flowing in, and it requires steady water flow to ensure precise temperature readings. When the water's temperature rises above the set point, the controller turns on the compressor and fan to reduce the water temperature. It turns these components off again once it reaches the desired temperature.
For indoor use only.
Features
-
10,000 BTU/hr
-
1″ NPT inlet/outlet ports (female threaded PVC)
-
Titanium Heat Exchanger = Reef Tank Safe
-
Recommended operating range ~40°F to ~100°F
-
59 dBA
-
6′ Power Cord
-
110 – 120 Volts / 7.2 Amps / 830 Watts
-
19.25”W x 19.75”D x 14.25”H
-
58 Pounds
-
1 Year Product Warranty
-
Proudly made in the USA
Specifications
-
Cooling Capacity: 10,000 BTU/hr
-
Horsepower: 1 HP
-
Heat Exchanger: Titanium (corrosion-resistant and reef-safe; prevents copper contamination)
-
Recommended Operating Range: ~40°F to ~100°F
-
Sound Level: 59 dBA
-
Power Requirements: 110–120V / 7.2A / 830W
-
Inlet/Outlet Ports: 1″ NPT (female threaded PVC)
-
Dimensions: 19.25″W × 19.75″D × 14.25″H
-
Weight: 58 lbs
-
Controller Type: Digital temperature controller with automatic compressor/fan activation
-
Flow Requirement: Continuous water flow required for accurate temperature monitoring
-
Pump Compatibility: Danner Mag-Drive 500–1800 GPH or equivalent (rated below 10 psi max pressure)
-
Efficiency: HE (High Efficiency) model with larger titanium coil for enhanced cooling without increased power consumption
-
Warranty: 1 Year Product Warranty
-
Usage: Indoor use only
-
Country of Manufacture: Proudly made in the USA
Pump and Controller Recommendation
-
Pump: Danner Mag-drive 500gph – 1800gph. Other pumps may be acceptable, however they need to be rated for less than 10psi max pressure. If you’re using a different pool/spa pump or any other pump rated in horsepower please talk with our tech support first. There is typically a simple work around that allows our chillers to provide cooling to systems which operate at higher pressures. We would be more than happy to help you determine the best method of installation for your system. Be sure and visit our “Accessories” web page to view our selection of pumps and accessory packages available.
-
Digital Controller: The controller constantly monitors your systems incoming water temperature, therefore, water flow is needed at all times in order for it to successfully read current temperatures. When your systems water temperature moves above your desired set point, the controller tells the compressor and fan to turn on and begin cooling the water. Once your desired set point temperature is reached, the compressor and fan will turn off.
-
High Efficiency: HE models utilize a larger titanium coil compared to the standard version. The larger coil offers more contact surface area and contact time to provide more cooling. Both models run the same compressor, which means their power draw is the same. The high efficiency model is providing more cooling without any extra power consumption.
